INTENDED USE OF PRODUCT:

ZAP-IT is ideal for use with ANY CORDLESS SCREWDRIVER, and is designed to help change strings quickly and easily. Direct drive on the tuning key provides a virtually ambidextrous feeling ... and a superb restring.

***PLEASE READ BEFORE USING***

For best results:

1. Make sure your driver is set to the desired rotation before you start ...
2. Remove the old string(s) (its usually not necessary to 'unwind' strings completely).
3. Maintain even tension on new strings when winding, allowing 1-2 inches extra string length for winding, and you want the string to wind 'down' the post for the best angle over the nut, typically. Go for a precise 'stacking' at the post.
4. Pluck each new string as it winds down to the neck to get 'ballpark' pitch.
5. Fine-tune your instrument.

Used properly, ZAP-IT will save you beaucoups in time and effort while providing
"a better wind, every time!"

Finally, while ZAP-ITS are intended for use with the cordless screwdriver, they will
work at warp speed in a variable-speed or other type drill set-up .... but it is beyond
design spec so be forewarned and duly careful.....

The name 'Zap-It' and the Configuration of this product are Trademarks of Whiskey Ridge Productions.

(c) 2000 Whiskey Ridge Productions.  Permission is granted to reprint in whole or in part.